Category Archives: Security

DShield (Cowrie) Honeypot Stats and When Sessions Disconnect, (Mon, Mar 30th)

This post was originally published on this site

A lot of the information seen on DShield honeypots [1] is repeated bot traffic, especially when looking at the Cowrie [2] telnet and SSH sessions. However, how long a session lasts, how many commands are run per session and what the last commands run before a session disconnects can vary. Some of this information could help indicate whether a session is automated and if a honeypot was fingerprinted. This information can also be used to find more interesting honeypot sessions.

TeamPCP Supply Chain Campaign: Update 003 – Operational Tempo Shift as Campaign Enters Monetization Phase With No New Compromises in 48 Hours, (Sat, Mar 28th)

This post was originally published on this site

This is the third update to the TeamPCP supply chain campaign threat intelligence report, "When the Security Scanner Became the Weapon" (v3.0, March 25, 2026). Update 002 covered developments through March 27, including the Telnyx PyPI compromise and Vect ransomware partnership. This update covers developments from March 27-28, 2026.

TeamPCP Supply Chain Campaign: Update 002 – Telnyx PyPI Compromise, Vect Ransomware Mass Affiliate Program, and First Named Victim Claim, (Fri, Mar 27th)

This post was originally published on this site

This is the second update to the TeamPCP supply chain campaign threat intelligence report, "When the Security Scanner Became the Weapon" (v3.0, March 25, 2026). Update 001 covered developments through March 26. This update covers developments from March 26-27, 2026.

TeamPCP Supply Chain Campaign: Update 001 ? Checkmarx Scope Wider Than Reported, CISA KEV Entry, and Detection Tools Available, (Thu, Mar 26th)

This post was originally published on this site

This is the first update to the TeamPCP supply chain campaign threat intelligence report, “When the Security Scanner Became the Weapon” (v3.0, March 25, 2026). That report covers the full campaign from the February 28 initial access through the March 24 LiteLLM PyPI compromise. This update covers developments since publication.

Apple Patches (almost) everything again. March 2026 edition., (Wed, Mar 25th)

This post was originally published on this site

Apple released the next version of its operating system, patching 85 different vulnerabilities across all of them. None of the vulnerabilities are currently being exploited. The last three macOS "generations" are covered, as are the last two versions of iOS/iPadOS. For tvOS, watchOS, and visionOS, only the current version received patches. This update also includes the recently released Background Security Improvements. Some older watchOS versions received updates, but these updates do not address any security issues.

Detecting IP KVMs, (Tue, Mar 24th)

This post was originally published on this site

I have written about how to use IP KVMs securely, and recently, researchers at Eclypsium published yet another report on IP KVM vulnerabilities. But there is another issue I haven't mentioned yet with IP KVMs: rogue IP KVMs. IP KVMs are often used by criminals. For example, North Koreans used KVMs to connect remotely to laptops sent to them by their employers. The laptops were located in the US, and the North Korean workers used IP KVMs to remotely connect to them. IP KVMs could also be used to access office PCs, either to enable undetected "work from home" or by threat actors who use them to gain remote access after installing the device on site.

Tool updates: lots of security and logic fixes, (Mon, Mar 23rd)

This post was originally published on this site

So, I've been slow to get on the Claude Code/OpenCode/Codex/OpenClaw bandwagon, but I had some time last week so I asked Claude to review (/security-review) some of my python scripts. He found more than I'd like to admit, so I checked in a bunch of updates. In reviewing his suggestions, he was right, I made some stupid mistakes, some of which have been sitting in there for a long time. It was nothing earth-shattering and it took almost no time for Claude, it took longer for me to read through the updates he wanted to make, figure out what he was seeing, and decide whether to accept them or tweak them. Here are a few of them.

CISA and USCG Identify Areas for Cyber Hygiene Improvement After Conducting Proactive Threat Hunt at US Critical Infrastructure Organization

This post was originally published on this site

Summary

The Cybersecurity and Infrastructure Security Agency (CISA) and U.S. Coast Guard (USCG) are issuing this Cybersecurity Advisory to present findings from a recent CISA and USCG hunt engagement. The purpose of this advisory is to highlight identified cybersecurity issues, thereby informing security defenders in other organizations of potential similar issues and encouraging them to take proactive measures to enhance their cybersecurity posture. This advisory has been coordinated with the organization involved in the hunt engagement.

In 2024, CISA led a proactive hunt engagement at a U.S. critical infrastructure organization with the support of USCG analysts. During hunts, CISA proactively searches for evidence of malicious activity or malicious cyber actor presence on customer networks. The organization invited CISA to conduct a proactive hunt to determine if an actor had been present in the organization’s environment. (Note: Henceforth, unless otherwise defined, “CISA” is used in this advisory to refer to the hunt team as an umbrella for both CISA and USCG analysts).

During this engagement, CISA did not identify evidence of malicious cyber activity or actor presence on the organization’s network, but did identify cybersecurity risks, including:

  • Insufficient logging;
  • Insecurely stored credentials;
  • Shared local administrator (admin) credentials across many workstations;
  • Unrestricted remote access for local admin accounts;
  • Insufficient network segmentation configuration between IT and operational technology (OT) assets; and
  • Several device misconfigurations.

In coordination with the organization where the hunt was conducted, CISA and USCG are sharing cybersecurity risk findings and associated mitigations to assist other critical infrastructure organizations with improving their cybersecurity posture. Recommendations are listed for each of CISA’s findings, as well as general practices to strengthen cybersecurity for OT environments. These mitigations align with CISA and the National Institute for Standards and Technology’s (NIST) Cross-Sector Cybersecurity Performance Goals (CPGs), and with mitigations provided in the USCG Cyber Command’s (CGCYBER) 2024 Cyber Trends and Insights in the Marine Environment (CTIME) Report.

Although no malicious activity was identified during this engagement, critical infrastructure organizations are advised to review and implement the mitigations listed in this advisory to prevent potential compromises and better protect our national infrastructure. These mitigations include the following (listed in order of importance):

  • Do not store passwords or credentials in plaintext. Instead, use secure password and credential management solutions such as encrypted password vaults, managed service accounts, or built-in secure features of deployment tools.
    • Ensure that all credentials are encrypted both at rest and in transit. Implement strict access controls and regular audits to securely manage scripts or tools accessing credentials.
    • Use code reviews and automated scanning tools to detect and eliminate any instances of plaintext credentials on hosts or workstations.
    • Enforce the principle of least privilege, only granting users and processes the access necessary to perform their functions.
  • Avoid sharing local administrator account credentials. Instead, provision unique, complex passwords for each account using tools like Microsoft’s Local Administrator Password Solution (LAPS) that automate password management and rotation.
  • Enforce multifactor authentication (MFA) for all administrative access, including local and domain accounts, and for remote access methods such as Remote Desktop Protocol (RDP) and virtual private network (VPN) connections.
  • Implement and enforce strict policies to only use hardened bastion hosts isolated from IT networks equipped with phishing-resistant MFA to access industrial control systems (ICS)/OT networks, and ensure regular workstations (i.e., workstations used for accessing IT networks and applications) cannot be used to access ICS/OT networks.
  • Implement comprehensive (i.e., large coverage) and detailed logging across all systems, including workstations, servers, network devices, and security appliances.
    • Ensure logs capture information such as authentication attempts, command-line executions with arguments, and network connections.
    • Retain logs for an appropriate period to enable thorough historical analysis (adhering to organizational policies and compliance requirements) and aggregate logs in an out-of-band, centralized location, such as a security information event management (SIEM) tool, to protect them from tampering and facilitate efficient analysis.

For more detailed mitigations addressing the identified cybersecurity risks, see the Mitigations section of this advisory.

Technical Details

Note: This advisory uses the MITRE ATT&CK® Matrix for Enterprise framework, version 17. See Appendix: MITRE ATT&CK Tactics and Techniques for a table of potential activity mapped to MITRE ATT&CK tactics and techniques.

Overview

Cybersecurity and Infrastructure Security Agency (CISA) and United States Coast Guard (USCG) analysts (collectively referred to as CISA in this report) conducted a threat hunt engagement at a critical infrastructure organization in 2024. During this hunt, CISA proactively searched for evidence of malicious activity or the presence of a malicious cyber actor on the customer’s network using host, network, industrial control system (ICS), and commercial cloud and open-source analysis tools. CISA searched for evidence of activity by looking for specific exploitation tactics, techniques, and procedures (TTPs) and associated artifacts.

While CISA did not find evidence of threat actor presence on the organization’s network, the team did identify several cybersecurity risks. These findings are listed below in order of risk. Technical details of each identified cyber risk are included, along with the potential impact from threat actor exploitation of each risk (recommendations for mitigating each risk are listed in the Mitigations section below).

Several of these findings align with those observed during similar engagements conducted by US Coast Guard Cyber Command (CGCYBER), which are documented in their 2024 Cyber Trends and Insights in the Marine Environment (CTIME) report. The authoring agencies encourage critical infrastructure organizations to review the CTIME report to understand trends in the techniques/attack paths threat actors are using to compromise at-risk organizations, and what mitigations organizations should implement to prevent a successful attack.

Key Findings

Shared Local Admin Accounts with Non-Unique Passwords Stored as Plaintext

Details: CISA identified a few local admin accounts with non-unique passwords; these accounts were shared across many hosts. The credentials for each account were stored plaintext in batch scripts. CISA discovered these authorized scripts were configured to create user accounts with local admin privileges and then set identical, non-expiring passwords—these passwords were stored in plaintext in the script. One script was configured to create an admin account (set with a password stored in the script in plaintext) and automatically add to the admin group. The account was set as the local admin account on many other hosts.

Potential Impact: The storage of local admin credentials in plaintext scripts across numerous hosts increases the risk of widespread unauthorized access, and the usage of non-unique passwords facilitates lateral movement throughout the network. Malicious actors with access to workstations with either of these batch scripts could obtain the passwords for these local admin accounts by searching the filesystem for strings like net user /add, identifying scripts containing usernames and passwords [T1552.001], and accessing these accounts to move laterally.

For example, during a controlled security validation exercise (with explicit permission from the customer), CISA used the credentials found in one of the scripts to log into its associated admin account locally on a workstation [T1078.003], and then establish a Remote Desktop Protocol (RDP) connection to another workstation [T1021.001]. This demonstrated that the credentials allowed local login to an admin account and enabled lateral movement to any workstation with the account. While using this account, the user had local admin privileges on many workstations. Upon initiating the RDP session, the system issued out a notification that another user was currently logged in and that continuing the session would disconnect the existing user, confirming that the account can be accessed remotely via RDP.

The uniform use of local admin accounts with identical, non-expiring passwords across numerous hosts, coupled with the storage of these credentials in plaintext within accessible scripts, elevates the risk of unauthorized access and lateral movement throughout the network.

With local admin access, malicious cyber actors can:

  • Modify existing accounts or create new accounts [T1098], potentially escalating privileges or maintaining persistent access.
  • Install malicious browser extensions on compromised systems [T1112].
  • Communicate with compromised systems using standard application layer protocols [T1071], which may bypass certain security monitoring tools.
  • Modify local policies to escalate privileges or disable security features [T1484].
  • Alter system configurations or install software that executes at startup [T1547], ensuring continued access and persistence.
  • Hijack the execution flow of applications to inject malicious code [T1574].

The widespread distribution of plaintext credentials and the use of identical passwords across hosts increases the risk of unauthorized access throughout the network. This vulnerability heightens the potential for attackers to conduct unauthorized activities, which may impact the confidentiality, integrity, and availability of the organization’s assets.

Note: This finding was associated with workstations only; servers and other devices were not affected.

Insufficient Network Segmentation Configuration Between IT and Operational Technology Environments

Details: While assessing interconnectivity between the customer’s IT and operational technology (OT) environments, CISA identified that the OT environment was not properly configured. Specifically, standard user accounts could directly access the supervisory control and data acquisition (SCADA) virtual local area network (VLAN) directly from IT hosts.

First, CISA determined it was possible to establish a connection via port 21 from a user workstation in the IT network to a system within the SCADA VLAN. The test established that a network path was available, the remote host was reachable, the port was open and listening for connections, and that the port was directly accessible between the IT and SCADA VLANs, with misconfigured network-level restrictions—for example, firewalls or access control lists (ACLs)—blocking the Transmission Control Protocol (TCP) connection on the port. This test was conducted using a standard user account on a regular IT workstation without administrative privileges [T1078].

Second, CISA discovered that the customer did not have sufficient secured bastion hosts dedicated for accessing SCADA and heating, ventilation, and air conditioning (HVAC) systems. A bastion host­—sometimes referred to as a jump box or jump server—is a specialized, highly secured system (often a server or dedicated workstation) that serves as the sole access point between a network segment (such as an internal IT network) and a protected internal network (like an OT or ICS environment). By inspecting and filtering all inbound and outbound traffic, a bastion host is designed to prevent unauthorized access and lateral movement, ensuring that only authenticated and authorized users can interact with internal systems. Though several hosts were designated as bastion hosts for remote access to SCADA and HVAC systems, they lacked the enhanced security configuration, dedicated monitoring, and specialized scrutiny expected of bastion hosts.

Potential Impact: Insufficient OT network segmentation configuration, network access control (NAC), and the ability of a non-privileged user within the IT network to use their credentials to access the critical SCADA VLAN [T1078] presents a security and safety risk. Given that SCADA and HVAC systems control physical processes, compromises of these systems can have real-world consequences, including risks to personnel safety, infrastructure integrity, and equipment functionality.

Malicious actors could further exploit potentially unsecured workstations with access to OT systems, and insufficient network segmentation configuration between IT and OT systems, in the following ways:

  • Use RDP or Secure Shell (SSH) protocols to move laterally from compromised IT workstations to OT systems [T1021.001] [T1021.004].
  • Execute commands and scripts using scripting languages like PowerShell to attack OT systems [T1059].
  • Map network connections to identify paths to OT systems [T1049].
  • Gather information about network configurations to plan attacks on OT systems [T1016].

By exploiting these weaknesses, attackers can potentially gain unauthorized access to critical OT systems, manipulate physical processes, disrupt operations, and cause harm.

Insufficient Log Retention and Implementation

Details: CISA was unable to hunt for every MITRE ATT&CK® procedure in the scoped hunt plan partly because the organization’s event logging system was insufficient for this analysis. For example, Windows event logs from workstations were not being forwarded to the organization’s security information event management (SIEM), verbose command line auditing was not enabled (meaning command line arguments were not being captured in Event ID 4688), logging in the SIEM was not as comprehensive as required for the analysis, and log retention did not allow for a thorough analysis of historical activity.

Potential Impact: The absence of comprehensive and detailed logs, along with a lack of an established baseline for normal network behavior, prevented CISA from performing thorough behavior and anomaly-based detection. This limitation hindered the ability to hunt for certain TTPs, such as living-off-the-land techniques, the use of valid accounts [T1078], and other TTPs used by sophisticated threat actors. Such techniques often do not produce discrete indicators of compromise or trigger alerts from antivirus software, intrusion detection systems (IDS), or endpoint detection and response (EDR) solutions. Further, the lack of workstation logs in the organization’s SIEM meant CISA could not analyze authentication events to identify anomalous activities, such as unauthorized access using local administrator credentials. This gap exposes networks to undetected lateral movement and unauthorized access.

Insufficient logging can prevent the detection of malicious activity by hindering investigations, which makes detection of threat actors more challenging and leaves the network susceptible to undetected threats.

Additional Findings

Misconfigured sslFlags on a Production Server

Details: CISA used PowerShell to examine the ApplicationHost.config file[1]—a central configuration file for Internet Information Services (IIS) that governs the behavior of the web server and its applications and websites—on a production IIS server. CISA observed an HTTPS binding configured with sslFlags==“0”, which keeps IIS in its legacy “one-certificate-per-IP” mode. This mode disables modern certificate-management features, and because mutual Transport Layer Security (TLS) (client-certificate authentication) must be enabled separately in “SSL Settings” or by adding <access sslFlags=“Ssl, SslRequireCert” />, the binding leaves the client-certificate enforcement off by default, allowing any TLS client to complete the handshake anonymously. Moreover, sslFlags does not control protocol or cipher selection, so outdated protocols or weak cipher suites (e.g., SSL 3.0, TLS 1.0/1.1) may still be accepted unless Secure Channel (Schannel)[2] has been explicitly hardened.

Potential Impact: The misconfigured sslFlags could enable threat actors to attempt an adversary-in-the-middle attack [T1557] to intercept credentials and data transmitted between clients and the IIS server. Malicious actors could also exploit vulnerabilities in older Secure Sockets Layer (SSL)/TLS protocols, as well as weak cipher suites, increasing the risk for protocol downgrade attacks in which an attacker forces the server and client to negotiate the use of weaker encryption standards [T1562.010]. This compromises the confidentiality and integrity of data transmitted over this channel. Furthermore, the absence of client certificate enforcement meant the server did not validate the identity of the connecting clients beyond the basic SSL/TLS handshake. This deficiency exposed the server to risks where unauthorized or malicious clients could impersonate legitimate users, potentially gaining access to sensitive resources without proper verification.

Misconfigured Structured Query Language Connections on a Production Server

Details: CISA reviewed machine.config file on a production server and identified that it was configured with a centralized database connection string, LocalSqlServer, for both profile and role providers. This configuration implies that, unless overridden in each application’s web.config files, every ASP.NET site on the server connects to the same Structured Query Language (SQL) Express or aspnetdb database and shares the same credentials context.

Additionally, CISA identified that the machine.config file set the minRequiredPasswordLength to be less than 15 characters, which is CISA’s recommended password length.

Potential Impact: Using a centralized database approach increases risk, as a single breach or misconfiguration in this central SQL database server can compromise all applications dependent on the server. This creates a single point of failure and could be exploited by attackers aiming to gain broad access to the system.

Additionally, setting the minimum password length to any password under 15 characters is more vulnerable to various forms of brute-force attacks, such as password guessing [T1110.001], cracking [T1110.002], spraying [T1110.003], and credential stuffing [T1110.004]. If a threat actor successfully cracked these weak passwords, they could gain unauthorized access to user or application accounts and leverage vulnerabilities within applications to further escalate privileges, potentially leading to unauthorized access to the backend SQL Server databases. This could result in data breaches, data manipulation, or a loss of database integrity.

Mitigations

CISA and USCG recommend that critical infrastructure organizations implement the mitigations below to improve their organization’s cybersecurity posture. Recommendations to reduce cyber risk are listed for each of CISA’s findings during this engagement and are ordered starting from the highest to lowest importance for organizations to implement. CISA and USCG also include general practices to strengthen cybersecurity for OT environments that are not tied to specific findings.

These mitigations align with the Cross-Sector Cybersecurity Performance Goals jointly developed by CISA and the National Institute for Standards and Technology (NIST). The Cybersecurity Performance Goals (CPGs) provide a minimum set of practices and protections that CISA and NIST recommend all organizations implement. CISA and NIST based the CPGs on existing cybersecurity frameworks and guidance to protect against the most common and impactful TTPs. Visit CISA’s CPGs webpage for more information.

Many of these mitigations also align with recommendations made by CGCYBER in their 2024 CTIME report. The report provides relevant information and lessons learned about cybersecurity risks gathered through operations similar to this threat hunt engagement, and best practices to mitigate these risks. Please see the 2024 CTIME report for additional recommendations for critical infrastructure organizations to implement to harden their environments against malicious activity.

Implement Unique Credentials and Access Control Measures for Administrator Accounts

  • Provision unique and complex credentials for local administrator accounts [CPG 2.C] on all systems. Do not use shared or identical administrative credentials across systems. Ensure service accounts/machine accounts have passwords unique from all member user accounts.
    • For example, organizations can deploy Microsoft LAPS (see Microsoft Learn’s Windows LAPS Overview for more information) to ensure each machine has a unique, complex local administrator password; passwords are rotated automatically within Microsoft Active Directory, reducing the window of vulnerability; and that password retrieval is limited to authorized personnel only.
  • Require phishing-resistant multifactor authentication (MFA) [CPG 2.H] in addition to unique passwords for all administrative access, including local- and domain-level administrator accounts, RDP sessions, and VPN connections.
  • Use privileged access workstations (PAWs) dedicated solely for administrative tasks and isolate them from the internet and general network to reduce exposure to threats and lateral movement.
    • Harden PAWs by applying CIS Benchmarks: limit software to essential administrative functions, disable unnecessary services and ports, and ensure regular updates and patches.
    • Enforce strict access controls to restrict PAW access to authorized administrators only.
  • Conduct continuous auditing of privileged accounts by regularly collecting and analyzing logs of administrative activities, such as login attempts, command executions, and configuration changes [CPG 2.T].
    • Configure automated alerts for anomalous behaviors, including logins outside standard hours, access from unauthorized locations, and repeated failed logins.
    • Periodically review all administrator accounts to confirm the necessity and appropriateness of access levels; align these auditing practices with NIST SP 800-53 Rev. 5 Controls AU-2 (Auditable Events) and AU-12 (Audit Record Generation).
  • Apply the principle of least privilege by limiting administrative privileges to the minimum required for users to perform their roles [CPG 2.E].
    • Create individual administrative accounts with unique credentials and role-specific permissions and disable or rename built-in local administrator accounts to reduce common attack vectors.
    • Avoid using shared administrator accounts to improve accountability and auditability, and ensure administrators use standard accounts for non-administrative tasks to minimize credential exposure.
    • Implement Role-Based Access Control (RBAC) to assign permissions based on job functions, as aligned with NIST SP 800-53 Rev. 5 Control AC-5 (Separation of Duties).
  • Identify and remove unauthorized or unnecessary local administrator accounts, maintain oversight by documenting and tracking all authorized accounts, and enforce strict account management policies by restricting account creation privileges and implementing approval workflows for new administrator accounts.

Securely Store and Manage Credentials

  • Purge credentials from the System Center Configuration Manager (SCCM). Review SCCM packages, task sequences, and scripts to ensure that no plaintext credentials are embedded, and update or remove any configurations that deploy scripts with plaintext credentials.
  • Do not store plaintext credentials in scripts. Instead, store credentials in a secure manner, such as with a credential/password manager or vault, or other privileged account management solution [CPG 2.L].
  • Use encrypted communication. If scripts must retrieve credentials at runtime, use encrypted channels and protocols (e.g., TLS 1.3) to communicate with secure credential stores. Ensure that credentials are not written to disk or exposed in logs.
  • Use unique local administrator passwords, such as by deploying Microsoft LAPS. Set appropriate permissions on Active Directory attributes used by LAPS (ms-MCS-AdmPwd and ms-MCS-AdmPwdExpirationTime) per Microsoft’s security recommendations.

Establish Network Segmentation Between IT and OT Environments

  • Assess the existing network architecture to ensure effective segmentation between the IT and OT networks [CPG 2.F]—this process should evaluate both logical and physical segmentation, ensuring clear boundaries between IT and OT assets.
    • Use NIST SP 800-82 Rev. 3 (Guide to OT Security) and International Electrotechnical Commission (IEC) 62443 standards as guides for network segmentation best practices.
    • Network segmentation is essential for containing breaches within isolated segments and preventing them from spreading across networks. Depending on your environment, consider implementing the following segmentation:
      • Implement VLAN segmentation with inter-VLAN access controls.
      • Create separate VLANs for IT and OT systems, specifically isolating OT components such as SCADA systems from IT network VLANs.
      • Configure inter-VLAN access controls, including Layer 3 ACLs, to restrict traffic between IT and SCADA VLANs.
      • Deploy firewalls with application-layer filtering capabilities to monitor and control data flow between the VLANs, ensuring that only authorized protocols and devices can communicate across segments.
  • Implement a demilitarized zone (DMZ) between IT and OT environments to provide an additional security layer.
    • Position firewalls at both the IT-DMZ and OT-DMZ boundaries to filter traffic and enforce strict communication policies.
    • Configure the DMZ to act as an intermediary, with only essential communications permitted between IT and OT networks.
    • Ensure the DMZ hosts shared services (e.g., bastion hosts, jump servers, or data historians) that require limited interaction with both environments, with access controls and monitoring in place.
  • Consider a full network re-architecture if current segmentation methods cannot effectively separate IT and OT networks.
    • Collaborate with cybersecurity and network experts to design an architecture that meets ICS-specific security requirements—this redesign may involve transitioning to a micro-segmented or zero trust architecture, which includes strict identity verification for all users and devices attempting to access OT assets.[3]
  • Implement unidirectional gateways (data diodes) where appropriate to prevent bidirectional communication.
  • Keep network diagrams, configuration files, and asset inventories up to date.
  • Regularly test segmentation controls to validate their effectiveness in restricting unauthorized access by conducting penetration testing and security assessments.
    • Include simulated breach scenarios to confirm that segmentation contains threats within isolated zones.
    • Ensure compliance with NIST SP 800-53 Rev. 5 Control AC-4 (Information Flow Enforcement) to align segmentation measures with best practices for controlled information flow.

Prevent Unauthorized Access via Port 21

  • Disable File Transfer Protocol (FTP) services on SCADA devices and servers if they are not required. Replace FTP with secure alternatives, such as SSH FTP (SFTP) or FTP over TLS/SSL (FTPS).
  • Block inbound and outbound FTP traffic on port 21 using firewalls and ACLs.
    • Implement restrictive ACL policies at network boundaries to control FTP access across all network layers.
    • As outlined in CIS Control 9.2 (Limit Unnecessary Ports, Protocols, and Services), close any unused ports to strengthen network defenses.
  • Implement IDS/Intrusion Prevention System (IPS) technologies to monitor traffic between the IT network and SCADA VLAN, use signature and anomaly detection, and integrate IDS/IPS with a SIEM system for centralized monitoring.
  • Enhance authentication and encryption mechanisms. Require MFA for SCADA access, use secure remote access technologies when necessary, securely encrypt communications (using protocols such as TLS 1.2 or higher, preferably TLS 1.3), and establish VPN tunnels to communicate between IT networks and SCADA systems.
  • Perform network traffic filtering and deep packet inspection.
    • Use SCADA-aware firewalls capable of understanding SCADA protocols and inspecting and filtering traffic at the application layer.
    • Only allowlist authorized protocols and command structures to SCADA operations. Use one-way communication devices to prevent data from flowing back into the SCADA network.

Establish Secure Bastion Hosts for OT Network Access

  • Ensure bastion hosts are dedicated secure access points exclusively used to access the OT network and deployed as exclusive management gateways for all devices within a network.
    • Make bastion hosts the single access points for conducting all administrative tasks, system management, and configuration changes; this centralizes access control and ensures any interaction with the OT system passes through a rigorously monitored and secure environment, minimizing the potential for unauthorized access.
  • Do not allow staff to use bastion hosts as regular workstations.
    • Provide staff with separate workstations for accessing email, internet browsing, etc., on the IT network.
    • Establish and enforce policies that prohibit non-administrative activities on bastion hosts, ensuring they remain dedicated to OT network access.
  • Regularly audit and monitor bastion hosts to maintain security integrity, prevent unauthorized use, and quickly address any vulnerabilities or policy non-compliance.
  • Configure comprehensive logging of all activities on bastion hosts, including authentication attempts, command executions, configuration changes, and file transfers. Aggregate logs into a SIEM.
  • Isolate bastion hosts from the IT network; bastion hosts should reside in a separate security zone with restricted communication pathways (see CISA’s infographic on Layering Network Security Through Segmentation).
    • Deploy bastion hosts in a DMZ, imposing physical and logical isolation from other networks.
    • Configure firewalls between the IT network, bastion hosts, and the OT network, enforcing strict access control policies to allow only necessary traffic.
  • Ensure secure configuration and hardening of bastion hosts: Comply with NIST SP 800-123 and CIS Benchmarks and CNSSI 4009-2015, remove nonessential applications and services to reduce the attack surface, configure system settings to be secure, conduct effective patch management, enforce the principle of least functionality, and disable unused ports and protocols.
  • Implement access control policies: remove any access permissions to the OT network from IT workstations and ensure only bastion hosts have access to the OT network.
    • Implement NAC solutions to enforce policy-driven access control decisions based on device compliance and user authentication to provide dynamic access control and real-time visibility into the devices on the network.
  • Equip each bastion host with robust authentication mechanisms, including phishing resistant MFA [CPG 2.H], to verify the identity of users accessing the network.
    • Align with AAL3 as defined in NIST SP 800-63B. AAL3 requires hardware-based authenticators and proof of possession of cryptographic keys through secure authentication protocols.
  • Implement stringent access controls that restrict access to authorized personnel only using RBAC principles, ensuring that personnel can only access information and perform tasks pertinent to their roles and duties. This reduces the risk of internal threats or lateral movement and prevents unauthorized access.
  • Securely configure remote access tools, including by using secure protocols and disabling remote access tools on IT workstations to the OT network, enforcing that all remote access occurs through bastion hosts.
    • Disable insecure protocols like Telnet and unencrypted VNC to prevent interception and unauthorized access.
    • Log all remote access sessions and monitor for unauthorized or anomalous activities.

Implement Comprehensive Logging, Log Retention, and Analysis

  • Implement comprehensive and verbose (i.e., detailed) logging across all systems, including workstations, servers, network devices, and security appliances [CPG 2.T].
    • Enable logging of critical events such as authentication attempts, command-line executions with command arguments (Event ID 4688), and network connections.
  • Aggregate logs in an out-of-band, centralized location [CPG 2.U] where adversaries cannot tamper with them, such as a dedicated SIEM, in order to facilitate behavior analytics, anomaly detection, and proactive threat hunting [CPG 2.T, 2.U]. For more information on behavior- and anomaly-based detection techniques, see joint guidance Identifying and Mitigating Living off the Land.
  • Ensure comprehensive logging on bastion hosts for all activities. Capture detailed records of login attempts [CPG 2.G], commands executed (with command arguments enabled), configurations changed, and files transferred.
  • Continuously monitor logs for early detection of anomalous activities. Configure the SIEM to generate automatic alerts for suspicious activity and implement behavior analysis techniques to detect anomalies.
  • Securely store log backups and use tamper resistant storage [CPG 2.U] to prevent a threat actor from altering or purging logs to conceal malicious activity.

For additional guidance on logging, see joint guidance Best Practices for Event Logging and Threat Detection.

Securely Configure HTTPS Bindings and LocalSqlServer Connection String

  • Enforce both client certificate verification and secure renegotiation in IIS by configuring the sslFlags setting to “3” in the ApplicationHost.config file. Setting sslFlags=“3” requires clients to present valid X.509 certificates for authentication and implements the TLS Renegotiation Indication Extension (RFC 5746). To implement this, perform the following steps:
    • Locate the <binding> element for the HTTPS site within ApplicationHost.config.
    • Set the sslFlags attribute to “3”: <binding protocol=“https” bindingInformation=“*:443:” sslFlags=“3” />.
    • Restart IIS to apply the changes: iisreset.
  • Restrict the server to use only secure and up-to-date SSL/TLS protocols and cipher suites.
    • Disable deprecated protocols like SSL 2.0, SSL 3.0, TLS 1.0, and TLS 1.1 to prevent protocol downgrade attacks that compromise the confidentiality and integrity of data.
  • Override the global settings in machine.config by modifying each application’s web.config file to define its own connection strings and providers. This isolates applications at the database level and allows for tailored security configurations for each application.
  • Create dedicated SQL Server database accounts for each application with permissions limited to necessary operations (e.g., SELECT, INSERT, UPDATE), and avoid granting excessive privileges.
    • Do not assign roles like db_owner or sysadmin to application accounts. This reduces the risk of privilege escalation and enhances accountability through segregated access logs.
  • Use machine.config only for configurations that must be applied globally across all applications on the server.
    • Audit the machine.config file to ensure no application-specific settings are present.

Enforce Strong Password Policies

  • Implement a system-enforced policy that requires a minimum password length of 15 or more characters for all password-protected IT assets and all OT assets, when technically feasible [CPG 2.B].
    • Consider leveraging passphrases and password managers to make it easier for users to maintain sufficiently long passwords.
  • In instances where minimum password lengths are not technically feasible, apply and record compensating controls, such as rate-limiting login attempts, account lockout thresholds, and strong network segmentation. Prioritize these systems for upgrade or replacement.
  • Implement MFA [CPG 2.H] in addition to strong passwords (i.e., passwords 15 characters or longer).

Additional Mitigation Recommendations to Strengthen Cybersecurity

CISA and USCG recommend critical infrastructure organizations implement the following additional mitigations (not tied to specific findings from the engagement) to improve the cybersecurity of their IT and OT environments:

  • Secure RDP from the IT to OT environments by deploying dedicated VPNs for all remote interactions with the OT network. Using RDP without strong authentication practices can lead to credential theft. Additionally, RDP does not inherently segregate or closely monitor user sessions, which can allow a compromised session to affect other parts of the network.
    • Deploy VPNs with strong encryption protocols such as SSL/TLS or Internet Protocol Security (IPsec) [CPG 2.K] to safeguard data integrity and confidentiality; use MFA [CPG 2.H] at all VPN access points to ensure only authorized personnel can gain access.
    • Configure VPN gateways to perform rigorous security checks and manage traffic destined for the OT network, ensuring comprehensive validation of all communications through pre-defined security policies.
      • VPN gateways should function as the primary enforcement points for access controls, scrutinizing every data packet to detect and block unauthorized access attempts.
    • Align the VPN traffic monitoring with the DMZ’s capabilities to regulate and inspect the data flow between IT and OT environments.
    • As part of the broader network architecture review, ensure the VPN infrastructure is correctly segmented from other network resources [CPG 2.F] to prevent any spillover effects from the IT environment to the OT network, containing potential breaches within isolated network zones.
    • Within the VPN configuration, enforce strict routing rules that require all remote access requests to pass through the DMZ and be authenticated by bastion hosts. This minimizes the risk of unauthorized access and ensures that all remote interactions with the OT network are monitored and controlled.
  • If wireless technology is employed within the OT environment, implement Wi-fi Protected Access 3 (WPA3)-Enterprise encryption with strong authentication protocols like Extensible Authentication Protocol (EAP)-TLS to ensure data confidentiality and integrity.
    • Deploy and continuously monitor Wireless Intrusion Prevention Systems (WIPS) to detect, prevent, and respond to unauthorized access attempts and anomalous activities within the wireless network infrastructure.
    • Disable unnecessary features like Service Set Identifier (SSID) broadcasting and peer-to-peer networking, enable Media Access Control (MAC) filtering as an additional layer, and keep wireless firmware updated.

Validate Security Controls

In addition to applying mitigations, CISA and USCG recommend exercising, testing, and validating your organization’s security program against the threat behaviors mapped to the MITRE ATT&CK for Enterprise framework in this advisory. CISA and USCG recommend testing your existing security controls inventory to assess how they perform against the ATT&CK techniques described in this advisory.

To get started:

  1. Select an ATT&CK technique described in this advisory (see Table 1 to Table 9).
  2. Align your security technologies against the technique.
  3. Test your technologies against the technique.
  4. Analyze your detection and prevention technologies’ performance.
  5. Repeat the process for all security technologies to obtain a set of comprehensive performance data.
  6. Tune your security program—including people, processes, and technologies—based on the data generated by this process.

CISA and USCG recommend continually testing your security program, at scale, in a production environment to ensure optimal performance against the MITRE ATT&CK techniques identified in this advisory.

Contact Information

Critical infrastructure organizations are encouraged to report suspicious or criminal activity related to information in this advisory to:

Additional Resources

For more information on improving cyber hygiene for critical infrastructure IT and OT environments, please see the following additional resources authored by CISA, CGCYBER, and international partners:

Disclaimer

The information in this report is being provided “as is” for informational purposes only. CISA and USCG do not endorse any commercial entity, product, company, or service, including any entities, products, or services linked within this document. Any reference to specific commercial entities, products, processes, or services by service mark, trademark, manufacturer, or otherwise, does not constitute or imply endorsement, recommendation, or favoring by CISA and USCG.

Version History

July 31, 2025: Initial version.

Appendix: MITRE ATT&CK Tactics and Techniques

See Table 1 to Table 9 for all referenced threat actor tactics and techniques in this advisory. For assistance with mapping malicious cyber activity to the MITRE ATT&CK framework, see CISA and MITRE ATT&CK’s Best Practices for MITRE ATT&CK Mapping and CISA’s Decider Tool.

Table 1: Initial Access
Technique Title ID Use
Valid Accounts T1078 Malicious actors could use access to valid accounts for access to IT and OT networks.
Valid Accounts: Local Accounts T1078.003 Threat actors could use credentials obtained for local administrator accounts to gain administrator access to workstations or services that use the account.
Account Manipulation T1098 Malicious actors could modify existing accounts or create new accounts to maintain access or escalate privileges. 
Table 2: Execution
Technique Title ID Use
Command and Scripting Interpreter  T1059 Malicious actors could use script interpreters like PowerShell to execute commands and scripts. 
Table 3: Persistence
Technique Title ID Use
Boot or Autostart Execution T1547 Malicious actors could configure autostart execution paths to ensure persistence.
Hijack Execution Flow T1574 Malicious actors could hijack the execution flow of applications and inject malicious code.
Table 4: Privilege Escalation
Technique Title ID Use
Domain or Tenant Policy Modification T1484 Malicious actors could modify domain policies to escalate privileges or evade defenses.
Table 5: Defense Evasion
Technique Title ID Use
Modify Registry T1112 Malicious actors could install malicious browser extensions on compromised systems.
Impair Defenses: Downgrade Attack T1562.010 Malicious actors could exploit vulnerabilities in older systems to force a downgrade to a less secure mode of operation.
Table 6: Credential Access
Technique Title ID Use
Unsecured Credentials: Credentials in Files T1552.001 Malicious actors could search for and exploit credentials stored in unsecured files. 
OS Credential Dumping T1003 Malicious actors could extract credentials from memory or storage from unsecured workstations.
Adversary-in-the-Middle T1557 Malicious actors could position themselves between networked devices to intercept credentials and other data. 
Brute Force: Password Guessing T1110.001 Malicious actors could systematically guess possible passwords.
Brute Force: Password Cracking T1110.002 Malicious actors could recover plaintext credentials after obtaining password hashes or other similar credential material.
Brute Force: Password Spraying T1110.003 Malicious actors could attempt to use a common password against different accounts to try to obtain account access. 
Brute Force: Credential Stuffing T1110.004 Malicious actors could try to use credentials gained from an unrelated account to gain access to a desired account in the victim’s environment. 
Table 7: Discovery
Technique Title ID Use
System Network Connections Discovery T1049 Malicious actors could map network connections to identify paths to OT systems from an unsecured IT workstation with access to the OT network. 
System Network Configuration Discovery T1016 Malicious actors could use an unsecured workstation to discover network configurations.
Table 8: Lateral Movement
Technique Title ID Use
Remote Services: Remote Desktop Protocol T1021.001 Malicious actors could use valid credentials to establish an RDP connection to access a workstation. 
Remote Services: SSH T1021.004 Malicious actors could use valid accounts to establish an SSH connection to a workstation.
Table 9: Command and Control
Technique Title ID Use
Application Layer Protocol T1071 Malicious actors could use application layer protocols to communicate with systems they compromised while blending in with existing network traffic. 

[1] While CISA used PowerShell to review these configuration settings, they can also be identified by running a search in any text editor.
[2] For more information, see Schannel – Microsoft Learn.
[3] Reference the Purdue Model for ICS Security as a guide for layered security zones and assess compliance with IEC 62443 network and system security standards; organizations may use this version of the model developed by Department of Energy (DOE) as a guide: Purdue Model Framework for Industrial Control Systems & Cybersecurity Segmentation.

Ransomware Actors Exploit Unpatched SimpleHelp Remote Monitoring and Management to Compromise Utility Billing Software Provider

This post was originally published on this site

Summary

The Cybersecurity and Infrastructure Security Agency (CISA) is releasing this advisory in response to ransomware actors leveraging unpatched instances of a vulnerability in SimpleHelp Remote Monitoring and Management (RMM) to compromise customers of a utility billing software provider. This incident reflects a broader pattern of ransomware actors targeting organizations through unpatched versions of SimpleHelp RMM since January 2025.

SimpleHelp versions 5.5.7 and earlier contain several vulnerabilities, including CVE-2024-57727—a path traversal vulnerability.1 Ransomware actors likely leveraged CVE-2024-57727 to access downstream customers’ unpatched SimpleHelp RMM for disruption of services in double extortion compromises.1 

CISA added CVE-2024-57727 to its Known Exploited Vulnerabilities (KEV) Catalog on Feb. 13, 2025.

CISA urges software vendors, downstream customers, and end users to immediately implement the Mitigations listed in this advisory based on confirmed compromise or risk of compromise.

Download the PDF version of this report:

Mitigations

CISA recommends organizations implement the mitigations below to respond to emerging ransomware activity exploiting SimpleHelp software. These mitigations align with the Cross-Sector Cybersecurity Performance Goals (CPGs) developed by CISA and the National Institute of Standards and Technology (NIST). The CPGs provide a minimum set of practices and protections that CISA and NIST recommend all organizations implement. CISA and NIST based the CPGs on existing cybersecurity frameworks and guidance to protect against the most common and impactful threats, tactics, techniques, and procedures. Visit CISA’s CPGs webpage for more information on the CPGs, including additional recommended baseline protections. These mitigations apply to all critical infrastructure organizations.

Vulnerable Third-Party Vendors

If SimpleHelp is embedded or bundled in vendor-owned software or if a third-party service provider leverages SimpleHelp on a downstream customer’s network, then identify the SimpleHelp server version at the top of the file <file_path>/SimpleHelp/configuration/serverconfig.xml. If version 5.5.7 or prior is found or has been used since January 2025, third-party vendors should:

  1. Isolate the SimpleHelp server instance from the internet or stop the server process.
  2. Upgrade immediately to the latest SimpleHelp version in accordance with SimpleHelp’s security vulnerability advisory.2
  3. Contact your downstream customers to direct them to take actions to secure their endpoints and undertake threat hunting actions on their network.

Vulnerable Downstream Customers and End Users

Determine if the system is running an unpatched version of SimpleHelp RMM either directly or embedded in third-party software.

SimpleHelp Endpoints

Determine if an endpoint is running the remote access (RAS) service by checking the following paths depending on the specific environment:

  • Windows: %APPDATA%JWrapper-Remote Access
  • Linux: /opt/JWrapper-Remote Access
  • MacOs: /Library/Application Support/JWrapper-Remote Access

If RAS installation is present and running, open the serviceconfig.xml file in <file_path>/JWrapper-Remote Access/JWAppsSharedConfig/ to determine if the registered service is vulnerable. The lines starting with <ConnectTo indicate the server addresses where the service is registered.

SimpleHelp Server

Determine the version of any SimpleHelp server by performing an HTTP query against it. Add /allversions (e.g., https://simple-help.com/allversions) to query the URL for the version page. This page will list the running version.

If an unpatched SimpleHelp version 5.5.7 or earlier is confirmed on a system, organizations should conduct threat hunting actions for evidence of compromise and continuously monitor for unusual inbound and outbound traffic from the SimpleHelp server. Note: This is not an exhaustive list of indicators of compromise.

  1.  Refer to SimpleHelp’s guidance to determine compromise and next steps.3
  2. Isolate the SimpleHelp server instance from the internet or stop the server process.
  3. Search for any suspicious or anomalous executables with three alphabetic letter filenames (e.g., aaa.exe, bbb.exe, etc.) with a creation time after January 2025. Additionally, perform host and network vulnerability security scans via reputable scanning services to verify malware is not on the system.
  4. Even if there is no evidence of compromise, users should immediately upgrade to the latest SimpleHelp version in accordance with SimpleHelp’s security vulnerabilities advisory.4

If your organization is unable to immediately identify and patch vulnerable versions of SimpleHelp, apply appropriate workarounds. In this circumstance, CISA recommends using other vendor-provided mitigations when available. These non-patching workarounds should not be considered permanent fixes and organizations should apply the appropriate patch as soon as it is made available.

Encrypted Downstream Customers and End Users

If a system has been encrypted by ransomware:

  1. Disconnect the affected system from the internet.
  2. Use clean installation media (e.g., a bootable USD drive or DVD) to reinstall the operating system. Ensure the installation media is free from malware.
  3. Wipe the system and only restore data from a clean backup. Ensure data files are obtained from a protected environment to avoid reintroducing ransomware to the system.

CISA urges you to promptly report ransomware incidents to a local FBI Field Office, FBI’s Internet Crime Compliant Center (IC3), and CISA via CISA’s 24/7 Operations Center (report@cisa.gov or 888-282-0870).

Proactive Mitigations to Reduce Risk

To reduce opportunities for intrusion and to strengthen response to ransomware activity, CISA recommends customers of vendors and managed service providers (MSPs) implement the following best practices:

  • Maintain a robust asset inventory and hardware list [CPG 1.A].
  • Maintain a clean, offline backup of the system to ensure encryption will not occur once reverted. Conduct a daily system backup on a separate, offline device, such as a flash drive or external hard drive. Remove the device from the computer after backup is complete [CPG 2.R].
  • Do not expose remote services such as Remote Desktop Protocol (RDP) on the web. If these services must be exposed, apply appropriate compensating controls to prevent common forms of abuse and exploitation. Disable unnecessary OS applications and network protocols on internet-facing assets [CPG 2.W].
  • Conduct a risk analysis for RMM software on the network. If RMM is required, ask third-party vendors what security controls are in place.
  • Establish and maintain open communication channels with third-party vendors to stay informed about their patch management process.
  • For software vendors, consider integrating a Software Bill of Materials (SBOM) into products to reduce the amount of time for vulnerability remediation.
    • An SBOM is a formal record of components used to build software. SBOMs enhance supply chain risk management by quickly identifying and avoiding known vulnerabilities, identifying security requirements, and managing mitigations for vulnerabilities. For more information, see CISA’s SBOM page.

Resources

Reporting

Your organization has no obligation to respond or provide information back to FBI in response to this advisory. If, after reviewing the information provided, your organization decides to provide information to FBI, reporting must be consistent with applicable state and federal laws.

FBI is interested in any information that can be shared, to include boundary logs showing communication to and from foreign IP addresses, a sample ransom note, communications with threat actors, Bitcoin wallet information, decryptor files, and/or a benign sample of an encrypted file.

Additional details of interest include a targeted company point of contact, status and scope of infection, estimated loss, operational impact, transaction IDs, date of infection, date detected, initial attack vector, and host- and network-based indicators.

CISA and FBI do not encourage paying ransom as payment does not guarantee victim files will be recovered. Furthermore, payment may also embolden adversaries to target additional organizations, encourage other criminal actors to engage in the distribution of ransomware, and/or fund illicit activities. Regardless of whether you or your organization have decided to pay the ransom, FBI and CISA urge you to promptly report ransomware incidents to FBI’s Internet Crime Complain Center (IC3), a local FBI Field Office, or CISA via the agency’s Incident Reporting System or its 24/7 Operations Center (report@cisa.gov) or by calling 1-844-Say-CISA (1-844-729-2472).

SimpleHelp users or vendors can contact support@simple-help.com for assistance with queries or concerns.

Disclaimer

The information in this report is being provided “as is” for informational purposes only. CISA does not endorse any commercial entity, product, company, or service, including any entities, products, or services linked within this document. Any reference to specific commercial entities, products, processes, or services by service mark, trademark, manufacturer, or otherwise, does not constitute or imply endorsement, recommendation, or favor by CISA.

Version History

June 12, 2025: Initial version.

Notes

1. Anthony Bradshaw, et. al., “DragonForce Actors Target SimpleHelp Vulnerabilities to Attack MSP, Customers,” Sophos News, May 27, 2025, https://news.sophos.com/en-us/2025/05/27/dragonforce-actors-target-simplehelp-vulnerabilities-to-attack-msp-customers/.
2. For instructions for upgrading to the latest version of SimpleHelp, see SimpleHelp’s security vulnerability advisory.
3. To determine possibility of compromise and next steps, see SimpleHelp’s guidance.
4. For instructions for upgrading to the latest version of SimpleHelp, see SimpleHelp’s security vulnerability advisory.

Threat Actors Deploy LummaC2 Malware to Exfiltrate Sensitive Data from Organizations

This post was originally published on this site

Summary

The Federal Bureau of Investigation (FBI) and the Cybersecurity and Infrastructure Security Agency (CISA) are releasing this joint advisory to disseminate known tactics, techniques, and procedures (TTPs) and indicators of compromise (IOCs) associated with threat actors deploying the LummaC2 information stealer (infostealer) malware. LummaC2 malware is able to infiltrate victim computer networks and exfiltrate sensitive information, threatening vulnerable individuals’ and organizations’ computer networks across multiple U.S. critical infrastructure sectors. According to FBI information and trusted third-party reporting, this activity has been observed as recently as May 2025. The IOCs included in this advisory were associated with LummaC2 malware infections from November 2023 through May 2025.

The FBI and CISA encourage organizations to implement the recommendations in the Mitigations section of this advisory to reduce the likelihood and impact of LummaC2 malware.

Download the PDF version of this report:

For a downloadable copy of IOCs, see:

AA25-141B STIX XML
(XML, 146.54 KB
)
AA25-141B STIX JSON
(JSON, 300.90 KB
)

Technical Details

Note: This advisory uses the MITRE ATT&CK® Matrix for Enterprise framework, version 17. See the MITRE ATT&CK Tactics and Techniques section of this advisory for threat actor activity mapped to MITRE ATT&CK tactics and techniques.

Overview

LummaC2 malware first appeared for sale on multiple Russian-language speaking cybercriminal forums in 2022. Threat actors frequently use spearphishing hyperlinks and attachments to deploy LummaC2 malware payloads [T1566.001, T1566.002]. Additionally, threat actors rely on unsuspecting users to execute the payload by clicking a fake Completely Automated Public Turing Test to tell Computers and Humans Apart (CAPTCHA). The CAPTCHA contains instructions for users to then open the Windows Run window (Windows Button + R) and paste clipboard contents (“CTRL + V”). After users press “enter” a subsequent Base64-encoded PowerShell process is executed.

To obfuscate their operations, threat actors have embedded and distributed LummaC2 malware within spoofed or fake popular software (i.e., multimedia player or utility software) [T1036]. The malware’s obfuscation methods allow LummaC2 actors to bypass standard cybersecurity measures, such as Endpoint Detection and Response (EDR) solutions or antivirus programs, designed to flag common phishing attempts or drive-by downloads [T1027].

Once a victim’s computer system is infected, the malware can exfiltrate sensitive user information, including personally identifiable information, financial credentials, cryptocurrency wallets, browser extensions, and multifactor authentication (MFA) details without immediate detection [TA0010, T1119]. Private sector statistics indicate there were more than 21,000 market listings selling LummaC2 logs on multiple cybercriminal forums from April through June of 2024, a 71.7 percent increase from April through June of 2023.

File Execution

Upon execution, the LummaC2.exe file will enter its main routine, which includes four sub-routines (see Figure 1).

Figure 1. LummaC2 Main Routine

Figure 1. LummaC2 Main Routine

The first routine decrypts strings for a message box that is displayed to the user (see Figure 2).

Figure 2. Message Box

Figure 2. Message Box

If the user selects No, the malware will exit. If the user selects Yes, the malware will move on to its next routine, which decrypts its callback Command and Control (C2) domains [T1140]. A list of observed domains is included in the Indicators of Compromise section.

After each domain is decoded, the implant will attempt a POST request [T1071.001] (see Figure 3).

Figure 3. Post Request

Figure 3. Post Request

If the POST request is successful, a pointer to the decoded domain string is saved in a global variable for later use in the main C2 routine used to retrieve JSON formatted commands (see Figure 4).

Figure 4. Code Saving Successful Callback Request

Figure 4. Code Saving Successful Callback Request

Once a valid C2 domain is contacted and saved, the malware moves on to the next routine, which queries the user’s name and computer name utilizing the Application Programming Interfaces (APIs) GetUserNameW and GetComputerNameW respectively [T1012]. The returned data is then hashed and compared against a hard-coded hash value (see Figure 5).

Figure 5. User and Computer Name Check

Figure 5. User and Computer Name Check

The hashing routine was not identified as a standard algorithm; however, it is a simple routine that converts a Unicode string to a 32-bit hexadecimal value.

If the username hash is equal to the value 0x56CF7626, then the computer name is queried. If the computer name queried is seven characters long, then the name is hashed and checked against the hard-coded value of 0xB09406C7. If both values match, a final subroutine will be called with a static value of the computer name hash as an argument. If this routine is reached, the process will terminate. This is most likely a failsafe to prevent the malware from running on the attacker’s system, as its algorithms are one-way only and will not reveal information on the details of the attacker’s own hostname and username.

If the username and hostname check function returns zero (does not match the hard-coded values), the malware will enter its main callback routine. The LummaC2 malware will contact the saved hostname from the previous check and send the following POST request (see Figure 6).

Figure 6. Second POST Request

Figure 6. Second POST Request

The data returned from the C2 server is encrypted. Once decoded, the C2 data is in a JSON format and is parsed by the LummaC2 malware. The C2 uses the JSON configuration to parse its browser extensions and target lists using the ex key, which contains an array of objects (see Figure 7).

Figure 7. Parsing of ex JSON Value

Figure 7. Parsing of ex JSON Value

Parsing the c key contains an array of objects, which will give the implant its C2 (see Figure 8).

Figure 8. Parsing of c JSON Value

Figure 8. Parsing of c JSON Value

C2 Instructions

Each array object that contains the JSON key value of t will be evaluated as a command opcode, resulting in the C2 instructions in the subsections below.

1. Opcode 0 – Steal Data Generic

This command allows five fields to be defined when stealing data, offering the most flexibility. The Opcode O command option allows LummaC2 affiliates to add their custom information gathering details (see Table 1).

Table 2. Opcode 1 Options
Key Value
p Path to steal from
m File extensions to read
z Output directory to store stolen data
d Depth of recursiveness
fs Maximum file size

2. Opcode 1 – Steal Browser Data

This command only allows for two options: a path and the name of the output directory. This command, based on sample configuration downloads, is used for browser data theft for everything except Mozilla [T1217] (see Table 2).

Table 2. Opcode 1 Options
Key Value
p Path to steal from
z Name of Browser – Output

3. Opcode 2 – Steal Browser Data (Mozilla)

This command is identical to Opcode 1; however, this option seems to be utilized solely for Mozilla browser data (see Table 3).

Table 3. Opcode 2 Options
Key Value
p Path to steal from
z Name of Browser – Output

4. Opcode 3 – Download a File

This command contains three options: a URL, file extension, and execution type. The configuration can specify a remote file with u to download and create the extension specified in the ft key [T1105] (see Table 4).

Table 4. Opcode 3 Options
Key Value
u URL for Download
ft File Extension
e  Execution Type

The e value can take two values: 0 or 1. This specifies how to execute the downloaded file either with the LoadLibrary API or via the command line with rundll32.exe [T1106] (see Table 5).

Table 5. Execution Types
Key Value
e=0 Execute with LoadLibraryW()
e=1 Executive with rund1132.exe

5. Take Screenshot

If the configuration JSON file has a key of “se” and its value is “true,” the malware will take a screenshot in BMP format and upload it to the C2 server.

6. Delete Self

If the configuration JSON file has a key of “ad” and its value is “true,” the malware will enter a routine to delete itself.

The command shown in Figure 9 will be decoded and executed for self-deletion.

Figure 9. Self-Deletion Command Line

Figure 9. Self-Deletion Command Line

Figure 10 depicts the above command line during execution.

Figure 10. Decoded Command Line in Memory

Figure 10. Decoded Command Line in Memory

Host Modifications

Without any C2 interactions, the LummaC2 malware does not create any files on the infected drive. It simply runs in memory, gathers system information, and exfiltrates it to the C2 server [T1082]. The commands returned from the C2 server could indicate that it drops additional files and/or saves data to files on the local hard drive. This is variable, as these commands come from the C2 server and are mutable.

Decrypted Strings

Below is a list of hard-coded decrypted strings located in the binary (see Figure 11).

Figure 11. Decoded Strings

Figure 11. Decoded Strings

Indicators of Compromise

See Table 6 and Table 7 for LummaC2 IOCs obtained by the FBI and trusted third parties.

Disclaimer: The authoring agencies recommend organizations investigate and vet these indicators of compromise prior to taking action, such as blocking.

Table 6. LummaC2 Executable Hashes
Executables Type
4AFDC05708B8B39C82E60ABE3ACE55DB (LummaC2.exe from November 2023) MD5
E05DF8EE759E2C955ACC8D8A47A08F42 (LummaC2.exe from November 2023) MD5
C7610AE28655D6C1BCE88B5D09624FEF MD5
1239288A5876C09D9F0A67BCFD645735168A7C80 (LummaC2.exe from November 2023) SHA1
B66DA4280C6D72ADCC68330F6BD793DF56A853CB (LummaC2.exe from November 2023) SHA1
3B267FA5E1D1B18411C22E97B367258986E871E5 TLSH
19CC41A0A056E503CC2137E19E952814FBDF14F8D83F799AEA9B96ABFF11EFBB (November 2023) SHA256
2F31D00FEEFE181F2D8B69033B382462FF19C35367753E6906ED80F815A7924F (LummaC2.exe from November 2023) SHA256
4D74F8E12FF69318BE5EB383B4E56178817E84E83D3607213160276A7328AB5D SHA256
325daeb781f3416a383343820064c8e98f2e31753cd71d76a886fe0dbb4fe59a SHA256
76e4962b8ccd2e6fd6972d9c3264ccb6738ddb16066588dfcb223222aaa88f3c SHA256
7a35008a1a1ae3d093703c3a34a21993409af42eb61161aad1b6ae4afa8bbb70 SHA256
a9e9d7770ff948bb65c0db24431f75dd934a803181afa22b6b014fac9a162dab SHA256
b287c0bc239b434b90eef01bcbd00ff48192b7cbeb540e568b8cdcdc26f90959 SHA256
ca47c8710c4ffb4908a42bd986b14cddcca39e30bb0b11ed5ca16fe8922a468b SHA256
Table 7. LummaC2 DLL Binaries
DLL Binaries Type
iphlpapi.dll IP Helper API
winhttp.dll Windows HTTP Services

The following are domains observed deploying LummaC2 malware.

Disclaimer: The domains below are historical in nature and may not currently be malicious.

  • Pinkipinevazzey[.]pw
  • Fragnantbui[.]shop
  • Medicinebuckerrysa[.]pw
  • Musicallyageop[.]pw
  • stogeneratmns[.]shop
  • wallkedsleeoi[.]shop
  • Tirechinecarpet[.]pw
  • reinforcenh[.]shop
  • reliabledmwqj[.]shop
  • Musclefarelongea[.]pw
  • Forbidstow[.]site
  • gutterydhowi[.]shop
  • Fanlumpactiras[.]pw
  • Computeryrati[.]site
  • Contemteny[.]site
  • Ownerbuffersuperw[.]pw
  • Seallysl[.]site
  • Dilemmadu[.]site
  • Freckletropsao[.]pw
  • Opposezmny[.]site
  • Faulteyotk[.]site
  • Hemispheredodnkkl[.]pw
  • Goalyfeastz[.]site
  • Authorizev[.]site
  • ghostreedmnu[.]shop
  • Servicedny[.]site
  • blast-hubs[.]com
  • offensivedzvju[.]shop
  • friendseforever[.]help
  • blastikcn[.]com
  • vozmeatillu[.]shop
  • shiningrstars[.]help
  • penetratebatt[.]pw
  • drawzhotdog[.]shop
  • mercharena[.]biz
  • pasteflawwed[.]world
  • generalmills[.]pro
  • citywand[.]live
  • hoyoverse[.]blog
  • nestlecompany[.]pro
  • esccapewz[.]run
  • dsfljsdfjewf[.]info
  • naturewsounds[.]help
  • travewlio[.]shop
  • decreaserid[.]world
  • stormlegue[.]com
  • touvrlane[.]bet
  • governoagoal[.]pw
  • paleboreei[.]biz
  • calmingtefxtures[.]run
  • foresctwhispers[.]top
  • tracnquilforest[.]life
  • sighbtseeing[.]shop
  • advennture[.]top
  • collapimga[.]fun
  • holidamyup[.]today
  • pepperiop[.]digital
  • seizedsentec[.]online
  • triplooqp[.]world
  • easyfwdr[.]digital
  • strawpeasaen[.]fun
  • xayfarer[.]live
  • jrxsafer[.]top
  • quietswtreams[.]life
  • oreheatq[.]live
  • plantainklj[.]run
  • starrynsightsky[.]icu
  • castmaxw[.]run
  • puerrogfh[.]live
  • earthsymphzony[.]today
  • weldorae[.]digital
  • quavabvc[.]top
  • citydisco[.]bet
  • steelixr[.]live
  • furthert[.]run
  • featureccus[.]shop
  • smeltingt[.]run
  • targett[.]top
  • mrodularmall[.]top
  • ferromny[.]digital
  • ywmedici[.]top
  • jowinjoinery[.]icu
  • rodformi[.]run
  • legenassedk[.]top
  • htardwarehu[.]icu
  • metalsyo[.]digital
  • ironloxp[.]live
  • cjlaspcorne[.]icu
  • navstarx[.]shop
  • bugildbett[.]top
  • latchclan[.]shop
  • spacedbv[.]world
  • starcloc[.]bet
  • rambutanvcx[.]run
  • galxnetb[.]today
  • pomelohgj[.]top
  • scenarisacri[.]top
  • jawdedmirror[.]run
  • changeaie[.]top
  • lonfgshadow[.]live
  • liftally[.]top
  • nighetwhisper[.]top
  • salaccgfa[.]top
  • zestmodp[.]top
  • owlflright[.]digital
  • clarmodq[.]top
  • piratetwrath[.]run
  • hemispherexz[.]top
  • quilltayle[.]live
  • equatorf[.]run
  • latitudert[.]live
  • longitudde[.]digital
  • climatologfy[.]top
  • starofliught[.]top

MITRE ATT&CK Tactics and Techniques

See Table 8 through Table 13 for all referenced threat actor tactics and techniques in this advisory. For assistance with mapping malicious cyber activity to the MITRE ATT&CK framework, see CISA and MITRE ATT&CK’s Best Practices for MITRE ATT&CK Mapping and CISA’s Decider Tool.

Table 8. Initial Access
Technique Title ID Use
Phishing T1566 Threat actors delivered LummaC2 malware through phishing emails.
Phishing: Spearphishing Attachment T1566.001 Threat actors used spearphishing attachments to deploy LummaC2 malware payloads.
Phishing: Spearphishing Link T1566.002 Threat actors used spearphishing hyperlinks to deploy LummaC2 malware payloads.
Table 9. Defense Evasion
Technique Title ID Use
Obfuscated Files or Information T1027 Threat actors obfuscated the malware to bypass standard cybersecurity measures designed to flag common phishing attempts or drive-by downloads.
Masquerading T1036 Threat actors delivered LummaC2 malware via spoofed software.
Deobfuscate/Decode Files or Information T1140 Threat actors used LummaC2 malware to decrypt its callback C2 domains.
Table 10. Discovery
Technique Title ID Use
Query Registry T1012 Threat actors used LummaC2 malware to query the user’s name and computer name utilizing the APIs GetUserNameW and GetComputerNameW.
Browser Information Discovery T1217 Threat actors used LummaC2 malware to steal browser data.
Table 11. Collection
Technique Title ID Use
Automated Collection T1119 LummaC2 malware has automated collection of various information including cryptocurrency wallet details.
Table 12. Command and Control
Technique Title ID Use
Application Layer Protocol: Web Protocols T1071.001 Threat actors used LummaC2 malware to attempt POST requests.
Ingress Tool Transfer T1105 Threat actors used LummaC2 malware to transfer a remote file to compromised systems.
Table 13. Exfiltration
Technique Title ID Use
Exfiltration TA0010 Threat actors used LummaC2 malware to exfiltrate sensitive user information, including traditional credentials, cryptocurrency wallets, browser extensions, and MFA details without immediate detection.
Native API T1106 Threat actors used LummaC2 malware to download files with native OS APIs.

Mitigations

The FBI and CISA recommend organizations implement the mitigations below to reduce the risk of compromise by LummaC2 malware. These mitigations align with the Cross-Sector Cybersecurity Performance Goals (CPGs) developed by CISA and the National Institute of Standards and Technology (NIST). The CPGs provide a minimum set of practices and protections that CISA and NIST recommend all organizations implement. CISA and NIST based the CPGs on existing cybersecurity frameworks and guidance to protect against the most common and impactful threats, tactics, techniques, and procedures. Visit CISA’s CPGs webpage for more information on the CPGs, including additional recommended baseline protections. These mitigations apply to all critical infrastructure organizations.

  • Separate User and Privileged Accounts: Allow only necessary users and applications access to the registry [CPG 2.E].
  • Monitor and detect suspicious behavior during exploitation [CPG 3.A].
    • Monitor and detect suspicious behavior, creation and termination events, and unusual and unexpected processes running.
    • Monitor API calls that may attempt to retrieve system information.
    • Analyze behavior patterns from process activities to identify anomalies.
    • For more information, visit CISA’s guidance on: Enhanced Visibility and Hardening Guidance for Communications Infrastructure.
  • Implement application controls to manage and control execution of software, including allowlisting remote access programs. Application controls should prevent installation and execution of portable versions of unauthorized remote access and other software. A properly configured application allowlisting solution will block any unlisted application execution. Allowlisting is important because antivirus solutions may fail to detect the execution of malicious portable executables when the files use any combination of compression, encryption, or obfuscation.
  • Protect against threat actor phishing campaigns by implementing CISA’s Phishing Guidance and Phishing-resistant multifactor authentication. [CPG 2.H]
  • Log Collection: Regularly monitoring and reviewing registry changes and access logs can support detection of LummaC2 malware [CPG 2.T].
  • Implement authentication, authorization, and accounting (AAA) systems [M1018] to limit actions users can perform and review logs of user actions to detect unauthorized use and abuse. Apply principles of least privilege to user accounts and groups, allowing only the performance of authorized actions.
  • Audit user accounts and revoke credentials for departing employees, removing those that are inactive or unnecessary on a routine basis [CPG 2.D]. Limit the ability for user accounts to create additional accounts.
  • Keep systems up to date with regular updates, patches, hot fixes, and service packs that may minimize vulnerabilities. Learn more by visiting CISA’s webpage: Secure our World Update Software.
  • Secure network devices to restrict command line access.
  • Use segmentation to prevent access to sensitive systems and information, possibly with the use of Demilitarized Zone (DMZ) or virtual private cloud (VPC) instances to isolate systems [CPG 2.F].
  • Monitor and detect API usage, looking for unusual or malicious behavior.

Validate Security Controls

In addition to applying mitigations, the FBI and CISA recommend exercising, testing, and validating your organization’s security program against threat behaviors mapped to the MITRE ATT&CK Matrix for Enterprise framework in this advisory. The FBI and CISA recommend testing your existing security controls inventory to assess performance against the ATT&CK techniques described in this advisory.

To get started:

  1. Select an ATT&CK technique described in this advisory (see Table 8 through Table 13).
  2. Align your security technologies against the technique.
  3. Test your technologies against the technique.
  4. Analyze your detection and prevention technologies’ performance.
  5. Repeat the process for all security technologies to obtain a set of comprehensive performance data.
  6. Tune your security program, including people, processes, and technologies, based on the data generated by this process.

The FBI and CISA recommend continually testing your security program, at scale, in a production environment to ensure optimal performance against the MITRE ATT&CK techniques identified in this advisory.

Reporting

Your organization has no obligation to respond or provide information to the FBI in response to this joint advisory. If, after reviewing the information provided, your organization decides to provide information to the FBI, reporting must be consistent with applicable state and federal laws.

The FBI is interested in any information that can be shared, to include the status and scope of infection, estimated loss, date of infection, date detected, initial attack vector, and host- and network-based indicators.

To report information, please contact the FBI’s Internet Crime Complaint Center (IC3), your local FBI field office, or CISA’s 24/7 Operations Center at report@cisa.gov or (888) 282-0870.

Disclaimer

The information in this report is being provided “as is” for informational purposes only. The FBI and CISA do not endorse any commercial entity, product, company, or service, including any entities, products, or services linked within this document. Any reference to specific commercial entities, products, processes, or services by service mark, trademark, manufacturer, or otherwise, does not constitute or imply endorsement, recommendation, or favor by the FBI and CISA.

Acknowledgements

ReliaQuest contributed to this advisory.

Version History

May 21, 2025: Initial version.